User Manuals

Find the correct setup, charging, operation, assembly, and troubleshooting guide for your Saber9 lightsaber.

Before using your saber, review the manual that matches the electronics or product version selected with your order. Controls, gestures, sound options, mobile app features, charging requirements, and assembly steps may vary between models.

Electronics Manuals

XRGB 3.0 Lightsaber Manual

Setup and operating instructions for Saber9 lightsabers equipped with the XRGB 3.0 electronics system.

This guide will cover:

• Power controls
• Blade color selection
• Sound and volume controls
• Motion gestures
• Bluetooth or mobile app functions where supported
• Charging guidance
• Basic troubleshooting

Manual coming soon.

Xenopixel V3 Lightsaber Manual

Operating instructions for Saber9 Xenopixel V3 lightsabers.

This guide will cover:

• Power and standby controls
• Sound font selection
• Blade effects
• Motion controls
• Volume adjustment
• Bluetooth or app controls where supported
• Charging and battery care
• Basic troubleshooting

Manual coming soon.

SN Pixel V4 Lightsaber Manual

Setup and operating instructions for Saber9 lightsabers equipped with the SN Pixel V4 system.

This guide will cover:

• Saber activation
• Sound font selection
• Blade effects
• Motion controls
• App connection where supported
• Volume settings
• Charging guidance
• Basic troubleshooting

Manual coming soon.

Proffie V2.2 Lightsaber Manual

General operating guidance for Saber9 Proffie V2.2 lightsabers.

Proffie sabers may support advanced customization, sound fonts, blade styles, motion controls, and configuration options.

Exact controls may depend on the configuration installed on your saber.

Manual coming soon.

Setup and Assembly Guides

Blade Installation Guide

Learn how to safely install, secure, and remove your lightsaber blade.

The guide will include:

• Blade insertion
• Retention screw placement
• Safe tightening
• Blade removal
• Pixel connector precautions
• Storage guidance

Guide coming soon.

Double Bladed Saber Assembly Guide

Instructions for assembling and separating compatible double bladed Saber9 models.

The guide will include:

• Coupler installation
• Hilt alignment
• Safe tightening
• Blade installation
• Disassembly
• Storage and transport

Guide coming soon.

Saber Assembly and Disassembly Guides

Some replica and specialty saber models require model specific instructions.

Only follow a guide that exactly matches your Saber9 product. Using the wrong disassembly method may damage internal wiring, connectors, buttons, or electronics.

Model specific guides coming soon.

Charging and Battery Guide

Use only the charging cable, charger type, voltage, and power source specified for your product.

General safety guidance:

• Do not use a damaged battery or charging cable
• Do not charge a wet product
• Do not leave the saber charging unattended
• Do not use an incompatible fast charger
• Do not expose the battery to fire or excessive heat
• Stop using the product if the battery becomes swollen, damaged, or unusually hot
• Keep batteries and charging equipment away from children

Charging requirements may vary by model. Always follow the instructions supplied with your product.

Detailed charging guide coming soon.

Mobile App Guides

Some XRGB, Xenopixel, and SN Pixel models may support Bluetooth or mobile app control.

App availability and features depend on the electronics version and firmware installed in the saber.

Do not download an app unless it is confirmed for your specific product version.

Compatible app guides and download instructions coming soon.

Basic Troubleshooting

Before contacting support, check the following:

• Charge the saber using the correct charging equipment
• Confirm that the battery is properly installed where removable
• Confirm that the blade is fully inserted
• Tighten only the approved retention screws
• Check whether the saber is in standby or deep sleep mode
• Review the correct control instructions for your electronics version
• Do not open or modify internal electronics without written authorization

Unauthorized disassembly, modification, soldering, or repair may affect return eligibility and warranty coverage.

Important Safety Notice

Saber9 products may contain bright lights, flashing effects, loud sounds, rechargeable batteries, long blades, and small removable components.

Use products responsibly and according to their intended purpose.

Do not:

• Point the blade toward the face or eyes
• Use the product near traffic
• Use the product as a weapon or for self defense
• Expose the product to water unless specifically rated for it
• Use excessive force
• Allow children to use or charge the product without appropriate supervision

Only products clearly identified as suitable for dueling should be used for impact based activities.